Announcement

Collapse
No announcement yet.

m40 Ring set 34

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • auslandser
    replied
    the Unertl m40a1 type. yes my m40a1 is clip slotted its a GAP build
    Attached Files

    Leave a comment:


  • Piteously Uninformed
    replied
    What base are your trying to match up with rings? A lugged M40A1 base with the welded in rings, or the later rail? I have a pair of 34MM rings that are the twist in style that fit on a Redfield base like used on the bases for the M40. Not sure if the rings are Redfield or Leupold?

    Leave a comment:


  • Sandymac21
    replied
    Is your A1 clip slotted?
    If it is,you could use the Badger or Ross base but these use 8/40 screws as opposed to the 6/48’s.So you may have to fill the base holes & redrill or open up your receiver screw holes.
    Or,you could get an A1 base,remove the rings & mill it to suit your bases.
    Or a set of Leupold Mk4 bases.

    Leave a comment:


  • auslandser
    started a topic m40 Ring set 34

    m40 Ring set 34

    Gday,
    Is there a ring set m40a1 type that can fit a 34mm tube I have a schmidt bender I would like to put on my m40a1 not my first choice but its near impossible to find an MST-100 In australia and importing one costs about another $600 due to ITAR.
    I have a bring back ring set with a bushnell in it and its just not cutting it for me.

    Thanks
Working...
X